Description
Floating Synergy Cabinet Wall Kit with Powder-Coated Steel Brackets
Powder-coated steel brackets on the Salamander Designs Wall Mounting Kit replace the cabinet feet entirely for a true floating presentation. The Salamander Designs Wall Mounting Kit ships in four variants for AV cabinets of single, twin, triple, and quad width. Its wall-stud attachment system consequently suits a dedicated home theater room or any space where floor area matters.
Structurally, Salamander Designs built the Wall Mounting Kit from powder-coated steel brackets that bolt directly to two 2×4 wall studs. Inside the installation, the brackets work with 16-inch or 24-inch stud centers without additional framing. Above the bracket line, the mounted cabinet sits with a minimum 2-inch clearance from the wall surface.
Bracket Installation, Cabinet Compatibility, and Cable Management
The Salamander Designs Wall Mounting Kit specifically fits Synergy Twin, Triple, and Quad cabinet widths as selectable variants. All three size variants then attach to receivers, amplifiers, and AV components housed inside the floating cabinet. From there, the floating cabinet position routes HDMI and audio cabling cleanly behind the wall without floor-level cable runs.
The bracket system then holds a quad-width cabinet at up to 250 lbs against the wall studs. Vibration from the wall also transfers less to components in a wall-mounted cabinet than in a floor-standing one. Beneath the cabinet, the brackets subsequently keep the full cabinet body parallel to the wall at the installed height.
Installation, Accessories, and a Dreamedia System Build
Throughout the installation, the kit works with existing stud spacing at 16 or 24-inch centers without special framing or blocking. Meanwhile, removing the feet and mounting the brackets gives the cabinet a floating appearance no bolt-over wall-mount kit can match. Beyond that, cabinet accessories from Salamander Designs notably pair with the Wall Mounting Kit to complete the full Synergy system.
In a custom home theater design, the Salamander Designs Wall Mounting Kit frees the floor below any Synergy cabinet. Dreamedia AV specialists can then match source components, displays, and speakers to complete the full setup around it. To begin, book a free home theater consultation with Dreamedia to start designing a system around this wall mounting kit.
Key Features
Complete removal of cabinet feet using powder coated steel brackets. The only wall mount solution for Synergy cabinets that completely removes the feet.
Suitable for single, twin, triple and quad sizes.
Can be fitted to 16″or 24″ centres with no special framing.
Minimum 2 x 2×4 wood studs will be required. 2″ gap from wall.
Quad size will hold up to 250lbs.
Floating cabinet will give a dramatic look freeing up the whole floor.
Complies with Proposition 65.
All fixing provided.










Reviews
There are no reviews yet.